Filter
Top Products
87
OTHER RECORDING FUNCTIONS
Creating Your Own BESTSHOT Setup
You can use the procedure below to save the setup of an
image you recorded for later recall when you need it again.
Recalling a setup you save automatically sets up the
camera accordingly.
1.
Enter the REC Mode, and select “
BESTSHOT” as the recording mode (page 53).
• This enters the BESTSHOT mode and displays a
sample scene.
2.
Use [̇] and [̈] to
display “Register
User Scene”.
3.
Press [SET].
4.
Use [̇] and [̈] to
display the image
whose setup you
want to register as a
BESTSHOT scene.
5.
Use [̆] and [̄] to
select “Save”, and
then press [SET].
• This registers the setup.
• Now you can use the
procedure on page 85
to select your user
setup for recording.