Filter
Top Products
55
BASIC IMAGE RECORDING
• This causes an image or a message to appear on
the monitor screen.
• This enters the REC mode for image recording.
• If the camera is in the PLAY mode when it turns on,
the message “There are no files” will appear if you do
not have any images stored in memory yet. In
addition, the icon will be visible at the top of the
display. If this happens, press [ ] (REC) to enter
the REC mode.
2.
Select “ Snapshot” as the recording mode
(page 53).
• This enters the Snapshot Mode and causes “ ”
(Snapshot mode) to appear on the monitor screen.
• You can use the key customization feature (page
106) to configure the camera to enter the Snapshot
mode whenever you press [̇] or [̈] while in the
REC mode.
Recording an Image
Your camera automatically adjusts shutter speed in
accordance with the brightness of the subject. Images you
record are stored in the camera’s built-in memory, or to a
memory card if you have one loaded in the camera.
• When an optionally available SD memory card or
MultiMediaCard (MMC) is loaded in the camera, images
are stored on the card (page 146).
1.
Press the power button or [ ] (REC) to turn
on the camera.
Power button
[ ]