Filter
Top Products
91
SHOOTING A SNAPSHOT
■ Shooting a Snapshot using Recorded and
Edited Face Data
After you record and edit face data, you can use it to shoot
photographs. The camera will record images in accordance with
the priority levels you configured for each set of face data.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Face
Recognition: Family First” and then press
[SET].
4. Point the camera at the
subjects.
The camera will detect the
faces of the people whose
face data has been saved in
camera memory. The
detected faces all will be
bounded by frames after detection is complete.
• The frames will be colored according to the priority level
of the face: White (lowest), yellow, or green (highest). A
green frame indicates the highest priority face when the
image is recorded.
5. Half-press the shutter button.
This will focus on the face with the highest priority (the one
with the green frame) and adjust its brightness. When
focusing is complete, a green focus frame will appears at
the faces that were indicated by green frames in step 4
above.
6. When you are ready to shoot, press the
shutter button the rest of the way.
NOT
E
• The “ (Tracking)” is selected for the AF area whenever
“Family First” is selected as the face recognition mode
(page 125).