Filter
Top Products
98
SHOOTING A MOVIE
■ Getting Ready to Shoot with Short Movie
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to
select the “Short Movie” scene
and then press [SET].
This causes “ ” to appear on the
monitor screen.
Pressing [ ] at this point will shoot a
Short Movie with a 4-second first part
and a 4-second second part.
If you want to configure settings for the
length of the first part, the length of the
second part, or MOTION PRINT
settings, continue from step 3.
3. Press [SET].
4. Use [S] and [T] to
select how long (in
seconds) you want the
first part of the Short
Movie to be and then
press [X].
5. Use [S] and [T] to
select how long (in
seconds) you want the
second part of the
Short Movie to be and
then press [X].
The total length of a Short Movie (first part plus second part)
must be at least two seconds and no longer than eight
seconds.
If you specify five seconds for the first part in step 4, for
example, you can specify no more than three seconds for
the second part. Specifying a value greater than three, in
this case, will cause the length specified for the first part to
be reduced automatically.
[BS]
Past part
length
Future part
length
MOTION PRINT settings