Filter
Top Products
USING A MEMORY CARD
107
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card. You can copy all files from
built-in memory to a memory card, or you can copy a single
file from the memory card to built-in memory.
To copy all the files in built-in memory to
a memory card
1.
Load the memory card into the camera.
2.
Turn on the camera. Next, enter the Play Mode,
and then press MENU.
3.
Select the “PLAY”
tab, select “Copy,”
and then press [ ].
Memory Card Precautions
• Use only an SD memory card or a MultiMedia Card with
this camera. Proper operation is not guaranteed when any
other type of card is used.
• Electrostatic charge, electrical noise, and other phenom-
ena can cause data to become corrupted or even lost. Al-
ways make sure that you always back up important data on
other media (MO disc, computer hard disk, etc.)
• If a memory card starts to behave abnormally, you can re-
store normal operation by reformatting it. However, we rec-
ommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
• We recommend that you format a memory card before us-
ing it for the first time after purchasing it, or whenever the
card you are using seems to be the cause of abnormal im-
ages.
• Before starting a format operation, connect the AC adaptor
for power or check to make sure that the battery is at full
charge. Power interruption during the format operation can
result in improper formatting, and even damage the
memory card and make it unusable.