Filter
Top Products
78
OTHER RECORDING FUNCTIONS
Using the Filter Function
The camera’s filter function lets you alter the tint of an image
when you record it.
1.
In a recording mode, press MENU.
2.
Select the “REC” tab, select “Filter,” and then
press [ ].
3.
Select the setting you want and then press
SET.
• Available filter settings are: Off, B/W, Sepia, Red,
Green, Blue, Yellow, Pink, Purple
IMPORTANT!
• Using the camera’s filter feature produces the same
effect as attaching a color filter to the lens.
• If color enhancement (page 77) and the filter function
are both turned on at the same time, the filter function
is given priority (color enhancement is not performed).
Specifying Color Saturation
Use the following procedure to control the intensity of the
image you are recording.
1.
In a recording mode, press MENU.
2.
Select the “REC” tab, select “Saturation,” and
then press [ ].
3.
Select the setting you want and then press
SET.
To get this:
High color saturation (intensity)
Normal color saturation (intensity)
Low color saturation (intensity)
Select this setting:
High
Normal
Low