Filter
Top Products
OTHER SETTINGS
98
3.
Use [ ] and [ ] to select the alarm whose set-
ting you want to configure, and then press
SET.
4.
Use [ ] and [ ] to select the setting you want
to change, and then use [ ] and [ ] to change
the selected setting.
• You set an alarm time, and setup an alarm to sound
either once or daily. You can also turn the alarm on
and off.
5.
Press DISP.
• You could press SET in place of DISP if you want to
configure the alarm without an image.
6.
Use [ ] and [ ] to select the scene you want to
appear at the alarm time, and then press SET.
7.
After all the settings are the way you want,
press SET.
• You can configure up to three alarms, named 1, 2, and
3.
Stopping the Alarm
When an alarm time is reached while the camera is turned
off, the alarm sounds for about one minute (or until you stop
it), even if the camera is turned off. The camera turns on
automatically after the alarm sounds. To stop the alarm after
it starts to sound, press any button.
IMPORTANT!
• The alarm does not sound when either of the following
conditions exists.
— When the camera is turned on
— While your are using the Interval Mode