OTHER SETTINGS
96
OTHER SETTINGS
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for gener-
ating the serial number used for file names (page 91).
1.
In a recording mode or the Play Mode, press
MENU.
2.
Select the “Set Up” tab, select “File No.,” and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and then
press SET.
Select this setting:
Continue
Reset
To do this for a newly saved file:
Store the last file number used and
increment it, regardless of whether
files are deleted or whether the
memory card is replaced with a new
one
Find the highest file number in the
current folder and increment it
Turning the Key Tone On and Off
Use the following procedure to turn the tone that sounds
when you press a key on and off.
1.
In a recording mode or the Play Mode, press
MENU.
2.
Select the “Set Up” tab, select “Beep,” and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and then
press SET.
Select this setting:
On
Off
To do this:
Turn on the key tone
Turn off the key tone