Filter
Top Products
77
OTHER RECORDING FUNCTIONS
Specifying Sensitivity
Use the following procedure to select the sensitivity setting
that suits the type of image you are recording.
1.
In a recording mode, press MENU.
2.
Select the “REC” tab, select “ISO,” and then
press [ ].
3.
Select the setting you want and then press
SET.
Enhancing Specific Colors
Use the following procedure when you want to enhance a
particular color in your recorded image.
1.
In a recording mode, press MENU.
2.
Select the “REC” tab, select “Enhance,” and
then press [ ].
3.
Select the setting you want and then press
SET.
NOTES
• Enhancing a color produces the same effect as at-
taching a color enhancer lens filter to the lens.
• If color enhancement and the filter function (page 78)
are both turned on at the same time, the filter function
is given priority (color enhancement is not performed).
To do this:
Turn off color enhancement
Enhance reds
Enhance greens
Enhance blues
Enhance flesh tones
Select this setting:
Off
Red
Green
Blue
Flesh Tones
IMPORTANT!
• Increasing sensitivity can cause static to appear in-
side an image. Select the sensitivity setting that suits
your shooting needs.
QV-R3
Auto : Automatic sensitivity selection
ISO125: Conforms with ISO125
ISO250: Conforms with ISO250
QV-R4
Auto : Automatic sensitivity selection
ISO100: Conforms with ISO100
ISO200: Conforms with ISO200