Filter
Top Products
10
En
Flash Ready LED
Note: When the camera is capturing or storing a picture or video clip, do not power the camera off; otherwise,
the picture or video clip may become corrupted.
LIVE VIEW THROUGH THE LCD
1. Turn the camera on.
2. Set it to ( ) Camera Mode.
(If the LCD display is turned off, press the ( ) button repeatedly until the LCD display is on).
3. Aim the camera at the subject, then look at the LCD to frame the desired object(s) to be included in the
photo. (fig.1.1)
Note: For better results, stand at least 2 ft (0.6m) away from the subject in Normal Mode.
4. Press the Shutter button halfway down to activate the Auto-Focus function until the green AF LED stops
blinking and the AF frame on the LCD changes to green. (fig.1.2)
(The camera will automatically determine the best focus, and a rapid click can be heard.)
Note:
• For more information on Focus Lock, refer to p. 11.
• To change AF mode, refer to p. 24.
5. Hold the camera steady with both hands, then press and hold the Shutter button down fully to capture the
image. (fig.1.3)
• When the image is captured, a beep can be heard.
• After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate that
the image is being stored.
• A preview of the image will be displayed on the LCD for a second. To change the preview time, refer to p. 42.
• The picture counter number displayed in the LCD will be updated.
6. If you are not satisfied with the captured image, simply press ( ) button to delete it before it is saved. For
more information, refer to p. 30.
Lit
The camera is
recording a video clip.
Blinking
The flash is recharging, or
LCD is in standby mode.
TAKING A PICTURE
fig. 1.1 fig. 1.2 fig. 1.3
A
AWB
A
AWB
A
AWB
Ú Ú
A
AWB
Ú Ú
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
Ú Ú
A
AWB
Ú Ú
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
Ú Ú
A
AWB
Ú Ú
A
AWB
4
M
28/45
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
WB
3
M
28/45
A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
A
AWB
4
M
28/45
A
AWB
A
AWB
Ú Ú
A
AWB
Ú Ú
A
AWB
A
AWB