Filter
Top Products
6
En
SETTING THE LANGUAGE, DATE AND TIME
When the camera is powered on for the first time, the Language, Date and Time menus will appear.
1. Press or to highlight the desired language. (fig. 1.1)
2. Press the OK button to select. The next screen will show the DATE/TIME SETUP page. (fig. 1.2)
3. Press to highlight the Date field, the Time field, the Date Format field or the Time Format field. The
selected segment will blink.
4. Press or to change the number in the blinking position, press to go to the next field.
5. Press the OK button to exit DATE/TIME setting. The next screen will display live view.
Note:
1. For each language, there is a default setting on Date format and TV broadcast standard. To change the TV
broadcast standard, refer to page 59..
Language(s) Date Format Setting TV Broadcast Standards
English / Español / MM/DD/YYYY NTSC
Francis / Deutsch DD/MM/YYYY PAL
/Italiano/ Nederlands/Português
YYYY/MM/DD PAL
2. If the batteries are removed or flat for about 4 minutes, the time setting will resume to factory settings. When
the camera is powered on again, the DATE/TIME setup screen will appear on the LCD. To reset date/time,
follow steps 2-5 above; to skip the date/time setting, press the OK button. You can set the date/time at a later
time. For instructions, refer to p.40.
GETTING STARTED
1
3
5
3
2
DATE/TIME SETUP
OK
01 - 01 - 2004
01 : 01 AM
MM - DD - YYYY
12 - HOUR
RETURN SET
1
3
5
3
2
fig. 1.1 fig. 1.2