Concord Camera DV2020 Camcorder User Manual


 
E28
Follow the procedures below to record sound. The possible recording time is
displayed according to the remaining space in the recording destination.
Recording Mode
1. Set the Mode Dial to [ ].
2. Press Shutter Button to start recording and the recording time will display
(see picture 2).
3. Press Shutter Button again to stop recording.
Note
z During recording, the Auto Power Off function will be disabled, even though
the auto power off time has been set.
z The LED (above the MENU button) will blink red while recording.
z While recording, do not try to turn off the power of digital video (or disconnect
the AC Adapter), turn the mode dial, nor take out the memory card, as any of
these actions could result in loss or damage of data stored in the internal
memory / memory card, or malfunction of the DV camera.
z Wait until recording has finished before changing the mode to another
setting or turning the DV off.
z The LCD will turn off automatically in 30 seconds after pressing Shutter
Button. Press any Button to turn on the LCD if you needed.
12