Filter
Top Products
E55
ENGLISH
Important!
When the camera is connected to your computer for the first time after the
installation of the camera drivers from the supplied CD-ROM, either of the 2
following sit u a tions would occur.
1. If the Mode Dial is set to the SET position, the com put er will recognize the cam
era and automatically complete the installation of the camera onto the computer.
2. If the Mode Dial is set to the ( ) position, the computer will recognize and
install the camera onto the computer, and messages prompting you to select
may occur un der Windows 98SE, Windows 2000 and Windows XP operating
systems.
nUnder Windows 98SE
1 The following message will pop up,
indicating that the Windows system
recognizes a new device and is
searching for the driver.
2 The following message will pop up to ask
for insertion of Windows 98SE CD-ROM.
Insert the Windows 98SE CD-ROM into the
CD-ROM drive, then click “OK”.
3 Click “Browse” to find the driver.
4 Locate and double click Windows 98 folder,
then click “OK” .