Filter
Top Products
64D-Link DCS-3415 User Manual
Section 4 - Configuration
IR-Cut Removable (ICR) filter is a switch mechanical design of two different sensor filters. It provides best light conditions
during the day and night. The following options are:
The Network Camera automatically switches between day and night mode by judging the level of ambient light. This mode
is accessible only when the exposure mode is set to Auto.
In this mode the Network Camera switches on the infrared cut filter. This will block the infrared light from reaching the sensor
so that the colors are not distorted.
The Network Camera switches off the infrared cut filter to allow the infrared light to pass through. This helps the Network
Camera to have a clearer image, especially in low light conditions.
The Network Camera switches between day and night mode based on a specific schedule. Ensure to enter the starting and
ending time for the day mode. Note that the time format is [hh:mm] and is expressed in 24-hour clock time. By default, the
starting time and ending time of day mode are set to 07:00 and 18:00.
ICR:
Auto:
Day Mode:
Night Mode:
Schedule Mode: