Filter
Top Products
23D-Link DCS-6111 User Manual
Section 3 - Conguration
AdjustingtheLens
Based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures:
AdjustingtheViewingAngle
Loosen the pan screw and turn the lens module left and right until the desired position is achieved. Tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and down until the desired position
is achieved; tighten the tilt screws once completed.
Loosen the image adjustment screw and turn the lens to adjust the network camera’s image until the desired
orientation is achieved, tighten the image adjustment screw once completed.
AdjustingZoomandFocus
Loosen the zoom controller and adjust the zoom factor by
moving the controller left and right until the desired range is
achieved; tighten the zoom controller once completed.
Loosen the focus controller and adjust the focus range by
moving the controller left and right until the image is clear;
tighten the focus controller once completed.
Loosen
Tighten
Tighten
Loosen
Tighten
Loosen
Loosen
Tighten