Filter
Top Products
54D-Link DCS-6111 User Manual
Section 3 - Conguration
1. Click New to add a new motion detection window.
2. Enter a name in the Window Name eld.
3. Dene the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and
Percentage slide bar.
4. Click Save to apply the changes.
5. Select Enable motion detection to activate motion detection.
Note: Drag to resize the window and click X to close the window.
The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network
Camera and are judged to exceed the dened threshold, a red bar rises. Meanwhile, the motion detection window will
be outlined in red. Utilizing this device as a trigger source, photos or videos can be captured instantly and sent to the
remote server (Email, FTP).
A green bar indicates that even though motions are detected, the event will not be triggered because the image variations
are still falling under the dened threshold.
Percentage = 30%
To enable motion detection, follow the steps below: