D-Link DCS-6111 Security Camera User Manual


  Open as PDF
of 85
 
65D-Link DCS-6111 User Manual
Section 3 - Conguration
DI and DO:
Digital input
trigger
condition:
Digital output:
Settings for both Digital input signal and digital
output signal can be congured here.
Please select High or Low for digital input trigger
condition. When an external device is connected
to the digital input pins, the state of the voltage will
be monitored. (Max. Input 500mA, 12Vdc)
Select Grounded or Open to dene normal status
of the digital output. The camera will show whether
the trigger is activated or not.
Advanced
DIandDO
The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting
such external alarm devices as IR-Sensors and alarm relays to the network camera.
 previous next