Filter
Top Products
44D-Link DCS-6111 User Manual
Section 3 - Conguration
Access name for
stream2:
HTTPS Port:
FTP Port:
RTSP Streaming:
Authentication:
Access name for
stream1:
Access name for
stream2:
The default name is video2.mjpg.
Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming source.
When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG, users will
receive continuous JPEG pictures. This technology, known as "server push", allows the Network Camera to feed live
pictures to Mozilla Firefox and Netscape. Use the following command to obtain the JPEG file:
http://<ip address>:<http port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to video.mjpg:
The URL command is http://192-168-0-051:80/video.mjpg
1. Launch Mozilla Firefox or Netscape
2. Type the URL command in the address field. Press Enter.
3. The JPEG image will be displayed in your web browser.
The default value is 443.
Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP
server. For example, FTP://68.5.1.81:60 (if you use port 60 for your FTP server)
This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA.
Select either Basic where the password is not encrypted, or Digest where the password is encrypted during the transmission
to the web server. After you have enabled the Authentication, you will need to congure and use the access name to access
your video le. RTSP://camera ip/live.sdp (live.sdp is the default access name, you can modify in the section below)
The default name is live.sdp.
The default name is live2.sdp.