Filter
Top Products
53D-Link DCS-6111 User Manual
Section 3 - Conguration
Enable motion
detection:
Window name:
Sensitivity:
Percentage:
New:
Save:
Check this option to turn on the motion detection
feature.
Create your own name for the monitored area/
window. It will show at the top of the motion
window.
Set the measurable difference between two
sequential images that would indicate motion.
Set the amount of motion in the window being
monitored that is required to initiate a motion
detected alert. If this is set to 100%, this means that
motion must be detected within the whole window
to trigger a snapshot.
Note: Setting a higher sensitivity and a lower
percentage will make motion easier to be
detected.
Click to add a new window. A maximum of three
motion windows can be opened simultaneously.
Use your mouse to drag the window frame to re-
size or the title bar to move. Clicking on the ‘x’ at
the upper right corner of the window will close the
window.
Save the related settings of that window.
MotionDetection
Once Motion Detection feature is enabled, users will be able to monitor three windows with different settings. This
allows your camera to serve as a security device that records only when motion is detected.