D-Link DCS-6111 Security Camera User Manual


 
41D-Link DCS-6111 User Manual
Section 3 - Conguration
LAN Settings:
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP
Presentation:
Settings for your local area network.
Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be assigned to your camera
automatically.
You may enter a static or xed IP address for your camera.
Enter an IP address.
The default value is “255.255.255.0.” This helps to determine if the
designated IP address is on the same subnet.
The gateway used to forward frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to a
different subnet. Usually the IP address of your router.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Allows a user to nd, view, and control this camera via a presentation
page or “Network Neighborhood” without conguration.
How does UPnP work?
UPnP
TM
networking technology provides automatic IP conguration and
dynamic discovery of devices added to a network. Services and capabilities
offered by networked devices, such as printing and le sharing, are
available among each other without bothersome network conguration.
In the case of Network Cameras, you will see Network Camera shortcuts
at My Network Places.
NetworkSetup