Filter
Top Products
66D-Link DCS-6111 User Manual
Section 3 - Conguration
ICR - IR-Cut Removable(ICR) lter is a switch mechanical design of two different sensor lters. It provides the best
light conditions both during the day and night. The following options are:
ICR
Auto:
Day Mode:
Night Mode:
Schedule Mode:
Disable IR LED:
The Network Camera automatically switches
between day and night mode by judging the level
of ambient light. This mode is accessible only
when the exposure mode is set to Auto.
In this mode the Network Camera switches on
the infrared cut lter at all times, which will block
the infrared light from reaching the sensor so that
the colors are not distorted.
The Network Camera switches off the infrared cut
lter to allow the infrared light to pass through.
This helps the Network Camera to see more
clearly in low light conditions.
The Network Camera switches between day and
night mode based on a specic schedule.
Ensure to enter the starting and ending time
for the day mode. Note that the time format is
[hh:mm] and is expressed in 24-hour clock time.
By default, the starting time and ending time of
day mode are set to 07:00 and 18:00.
Select to disable the IR LED. The IR LED
automatically switches on at night. By default the
LED automatically switches on at night.