Filter
Top Products
79D-Link DCS-6111 User Manual
Section 5 - Fixed Dome Day & Night Network Camera With WDR Sensor Installation
8. I connected the Network Camera directly to a computer with a cross-over Ethernet cable and received a
Windows error upon running the Installation Wizard?
• This Windows error will occur if the WDR D&N Fixed Dome Network Camera is connected to a computer that is not properly congured
with a valid IP address. Turn off DHCP from the Network Settings in Windows and congure the computer with a valid IP address or
connect the camera to a router with DHCP enabled.
• This error can also occur if the Installation Wizard icon had been clicked more than once from the setup wizard.
9. Noisy images occur. How can I solve the problem?
The video images might be noisy if the WDR D&N Fixed Dome Network Camera is used in a very low light environment. To solve this
issue you need more lighting.
10. The images appear to be of poor quality, how can I improve the image quality?
• Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256 colors on your computer will produce
dithering artifacts in the image, making the image appear to be of poor quality.
• The conguration on the WDR D&N Fixed Dome Network Camera image display is incorrect. Through the Setup > Image Setup section
of the Web management you need to adjust the image related parameters such as brightness, white balance and power line frequency
for uorescent light.