Filter
Top Products
24D-Link DCS-6111 User Manual
Section 3 - Conguration
AttachingtheEnclosure
Once the lens is properly adjusted, rearrange the light shield so that it will not obstruct the lens during surveillance.
Place the dome enclosure over the network camera so that the LED sticker on
the dome enclosure is properly aligned with the camera’s LED. Insert the supplied
screws into the two holes located at the base of the dome enclosure, tighten until
secure.
Place the ring enclosure over the dome enclosure. Once placed, gently turn
the ring enclosure clockwise until it locks and is securely attached to the dome
enclosure.
Note: When attaching the ring enclosure, be sure to rst align the line on the ring enclosure
with the triangle on the dome enclosure. When attachment is successfully made, the line on
the ring enclosure will be aligned with the line on the dome enclosure.