Filter
Top Products
50D-Link DCS-6111 User Manual
Section 3 - Conguration
Enable WDR
(Wide Dynamic
Range):
Switch to B/W
(Night Mode):
White Balance:
Maximum
Exposure Time:
Brightness:
Saturation:
Contrast:
Overlay Title and
Time Stamp on
Video:
Privacy Mask:
Select to enable the WDR function. WDR provides better performance especially when the image contains both very dark
and bright areas. Also helps the camera to cope with varying lighting conditions.
Note: When you select this function, Exposure level and AGC functions will be disabled.
Select to automatically enable the camera to switch to B/W night mode.
Select either Auto or Fix from the drop-down box. Select Auto to automatically adjust the white balance of the object.
Otherwise, select Fix to manually set the white balance conditions in advance.
Select to set the exposure time of the camera. 1/30s, 1/15s, or 1/5s are the available options in the drop-down box. The
default value is 1/30s.
Select to change the brightness value for the Network Camera. The range varies from -5 to +5.
Select to change the saturation value of the camera. The default value is 0.
Select to change the contrast value of the camera. The default value is 0.
Select to add a date and time stamp on the video.
Select Privacy Mask to open the Privacy Mask page. In this page,
you can block out certain sensitive zones for privacy concerns.
To set up a Privacy Mask Window, follow the steps given
below:
1. Click New to add a window.
2. The height and width of the window should be at least twice
the size of the object in order to resize and drag-drop the
window.
3. Enter a descriptive Window Name and click Save to apply
changes.
4. Select Enable privacy mask to facilitate this function.
NOTE:
1. Up to ve privacy mask windows can be set in the same screen.
2. Privacy masks will appear on all video stream and recording video.
3. Privacy masks will overlap with motion detection windows. The masked area will not detect any motion.