Filter
Top Products
8D-Link DCS-6111 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
DC Power Connector
The DC power connector is located
on the side panel of the DCS-6111.
This 12V DC single-socket, supplies
power to the network camera.
Ethernet Cable Connector (PoE)
The network camera’s side panel features an
RJ-45 connector for connections to 10Base-T
Ethernet cabling or 100Base-TX Fast
Ethernet cabling. This network port supports
the NWay protocol, allowing this network
camera to automatically detect or negotiate
the transmission speed of the network. The
Ethernet port can also be used to power the
camera by using a PoE switch.
Reset Button
Reset is initiated when
the reset button is
pressed once and held
until the power LED
ashes through its cycle
twice.
DI/DO
Focus Controller
Adjustment Screw
Tilt Screw
Pan Screw
Zoom Controller
Audio Out Connector
Use the Audio Out connector
for 2-way audio connection.
Speakers (not included) may
be connected to the camera for
2-way audio communication.
Microphone On/Off Switch
To turn the microphone on/off.
MIC In (Microphone Connector)
Use the MIC In connector for 2-way audio
connection. Microphone (not included) may
be connected to the camera for 2-way
audio communication.