Filter
Top Products
110
Solving Problems
Scanning Problems
The file size is too big.
Adjust your scan settings. Try
setting at a lower resolution (dpi),
or scan only part of the image.
Your scanned image is faint or has
gaps.
■
Check the brightness. Decrease
the software or driver’s
brightness setting.
■
Try adjusting the
Gamma
and
Exposure
settings in the Image
Controls window.
■
Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show
up in your scan.
■
Make sure the document is
placed flat against the document
table.