Filter
Top Products
Solving Problems
117
3. If paper jams in the paper eject
position, open the cover on the right
and slowly pull out the jammed paper
as shown. (Be careful not to pull too
hard or the paper may tear, making it
more difficult to remove.)
4. If the paper tears, open the middle
cover and remove the paper.
Changing the Document Feed Speed
When you scan using the automatic
document feeder, you can select a
document feed speed of
Low
and
High
. Under normal conditions, use
the high speed mode. If you want to
scan thick documents or reduce
noise of an image, use the low speed
mode.
To change the document feed speed,
lift the ADF and locate the switch as
shown. Slide the switch up for high
speed, or down for low speed.
High
Low