Epson P-6000 Digital Photo Frame User Manual


 
Use only an Epson Lithium-ion battery for the viewer according to the directions in the user
documentation.
You can use the following two methods to charge the battery. Connect the viewer (Model: G971A/
G971B) and the AC adapter (Model: A351H). Place the battery in the battery charger (Model:
EU-217).
Do not use the battery that comes with the viewer for other devices.
To protect against short-circuiting, do not remove the outside case of the battery.
Do not handle the battery with wet hands or use them near water.
Do not expose the battery to water or high humidity.
Do not drop, puncture, disassemble, mutilate, or short-circuit the battery.
Do not place the battery near or into fire or water.
Do not use batteries that are leaking or damaged in any way.
Do not charge the battery using devices except for this product or the specified battery charger
(Model: EU-217).
Do not use, charge, or leave the battery near an open flame or in a very hot location with a
temperature of 35°C or above.
Keep batteries away from heat sources.
Do not leave the battery in a vehicle, to prevent the battery from overheating.
Do not insert objects into any openings as they may touch dangerous voltage points or
short-circuit components.
Prevent the battery from coming into contact with metal objects that could short-circuit it, such
as coins or keys.
Do not insert the battery into power outlets or other power sources such as car cigarette lighter
sockets.
Do not solder wires or terminals directly to the battery.
Do not touch battery terminals.
Keep batteries away from open flame if they leak or smell strange.
If overheating, discoloration, or distortion occurs, remove the battery from the viewer and do
not use it.
R41A0K180 User’s Guide
Safety Instructions 12