Filter
Top Products
The data is not displayed
Cause What to do
The photo, video, or audio file you selected is
not supported.
See "Photo/Video file formats supported by the viewer" on page 43 or
"Audio file formats supported by the viewer" on page 76 and make sure the
data is supported. Also, check the codec of the data if you are trying to
display a video file. You can convert and transfer video and audio files with
the Epson Link2 software.
The data is broken. Copy the data again.
The LCD Brightness setting is too dark. See "Changing the Viewer Settings" on page 83 and make sure the LCD
Brightness setting is set properly.
The video cable is connected to the viewer Disconnect the video cable to display the LCD.
There is too much data to display on the screen
at one time
Divide the data into multiple folders and switch to computer view. For
details on switching the view mode, see "Switching the view mode" on page
47.
The color space information cannot be recognized
Cause What to do
The color space information cannot be
recognized with the viewer if you edit the
image with image edit software.
Set the color space from Settings. For details, see "Changing the Viewer
Settings" on page 83.
The movie is not displayed clearly or stops abruptly
Cause What to do
The bit rate of the data is too high. Check the bit rate. For details, see "Photo/Video file formats supported by
the viewer" on page 43. You can convert and transfer video files with the
Epson Link2 software.
R41A0K180 User’s Guide
Troubleshooting 93