Filter
Top Products
Chapter 4
Transferring Data from the Viewer
You can transfer data in the viewer to a USB device or computer and save important data.
Transferring to USB Storage Devices or CF/SD Memory Cards
You can transfer the data of this viewer to USB devices or memory cards. This is useful when you
want to back up data in the viewer without using a computer. However, both the viewer and the USB
device will require a power supply, and may take some time to transfer the data depending on the
volume of data in the viewer. You can use the following USB storage devices capable of copying:
external HDD drives, CD/DVD drives, USB memories, and card reader/writers.
Note the following points when burning data to a CD/DVD.
❏ Insert a disc before connecting the CD/DVD drive to the viewer.
❏ Use only blank media.
❏ After copying, you cannot add any more data to the media.
❏ You can only record on single-layer DVD-R discs.
❏ Some CD/DVD drives may not be compatible.
❏ Place data to transfer in a viewer folder with a hierarchy of no more than six levels.
Copying particular data
Note:
This function is not available if the SD memory card is locked.
1. Connect a USB device or insert a memory card. For details, see "Connecting a USB device" on page
34 or "Inserting CF/SD memory cards" on page 30.
2. Highlight a file or folder to copy.
3. Press the Menu key to display the pop up menu, select Copy/Move using the Up or Down key,
then press the OK key.
R41A0K180 User’s Guide
Transferring Data from the Viewer 37