Filter
Top Products
16 of 59
3 IP- SETUP
3.1 NETWORK INSTALLATION / BASIC IP - SETUP WITH
IP-FINDER
The IP-Finder application (on application CD in camera package) is a useful tool for initial IP
- setup f the camera.
Start the IP-Finder at a PC, which is connected in to the same network as the camera is or
use a direct network connection camera<>PC.
Click on "Update" to search cameras in your network, the cameras will be listed in the left
side of the screen.
Mark a camera in the list by mouseclick. The current IP - settings, name and the MAC -
address of the camera are shown now at the right screen side.
Modify the IP settings fitting to your requirements. The field "Name" is free editable for
camera title.
With clicking "Submit" the new settings will be sent to the camera.
Default factory IP settings:
IP-Address: 192.168.0.20
Subnet mask: 255.255.255.0
Gateway: 192.168.0.254
HTTP Port 1: 80
HTTP Port 2: -
3.2 NETWORK INSTALLATION / ROUTER SETTINGS
The router setup methods depend on manufacturer and type. Important is the mapping of IP
- address and port of the camera.
The required port for standard operation is port 80.
Optional installed services may require additional port mappings.