Filter
Top Products
9 Using FotoFUN! for Windows
2. Connect the other side to the back of your computer at
LPT1, LPT2, or the PARALLEL connector.
The printer must have its
clear
light illuminated to receive
data. If the light is not on, press the
clear
button. When
connected properly, both the illuminated
on off
and
clear
lights will remain solid.
B. INSTALLING THE
FotoFUN!
PRINTER DRIVER
FotoFUN! can be used with virtually any Windows 3.1x/95
application program. This is accomplished by installing in
Windows what is called a Òprinter driver.Ó The printer driver
is simply a diskette with software on it which gives FotoFUN!
all the information needed for printing. Use the following
steps to install the FotoFUN! printer driver. Keep in mind that
the original FotoFUN! printer driver packaged with the printer
must be installed before installing any other printer driver
versions or upgrades.
IMPORTANT!
You must keep the original printer driver diskette which
shipped with your printer. This printer driver diskette
includes special print information which is unique to your
specific printer and may be called for when updating printer
drivers. Do not lose this disk!
Windows 95
To install the printer driver into Windows 95, refer to the
following:
1. Insert the printer driver diskette into your computerÕs disk
drive.
510489 FotoFUN! 7/29/98 3:26 PM Page 10