Filter
Top Products
2
3130
3
Beep
4
Keep holding the shutter button down halfway
(AF/AE lock). Check that the AF frame on the
LCD monitor shrinks and that the shutter speed
and aperture setting are displayed (the
viewfinder lamp (green) changes from blinking to
steady).
Continue to hold the shutter button down
halfway. Move the camera back to the original
image and then fully press down on the shutter
button.
●
!
You can reapply the AF/AE lock as many times as
you like before releasing the shutter.
●
!
The AF/AE lock operates in all still image modes and
can be used to ensure excellent results.
USING AF/AE LOCK
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
Move the camera slightly so that one of the
subjects is in the AF frame.
◆
AF/AE Lock
◆
On the FinePix50i, when you press the shutter button down halfway, the focus and exposure
settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image
or if you want to set the exposure before you compose the final shot, lock the AF and AE settings
and then compose and shoot your picture to get the best results.
1 2