Filter
Top Products
7-14
7.2 Setup mode functions
LCD
display
Descriptions Selectable
parameters
Default Mode Remarks
On-
line
Off-
line
B.Drop-out Specifies the back page
dropout color for a
monochrome scan.
R
G
B
G Avail-
able
Avail-
able
Settings via the
PC have the
priority.
Brightness Adjust the Front/Back
Brightness to compensate for
the grayscale level differences
between the CCDs.
-6 to +6 0 Avail-
able
Avail-
able
SCSI ID Specifies SCSI ID of the
scanner.
0 to 7 5 Not
Avail-
able
Avail-
able
New SCSI ID
valid after
power cycle.
Product ID Specifies the scanner product
ID.
fi4860C /
fi4990C /
M4099D /
M3099G
fi4860C Not
Avail-
able
Avail-
able
New setting
valid after
power cycle.
SCSI Bus Specifies the SCSI data bus
width, 8bit or 16 bit.
16bit/
8bit
16bit Not
Avail-
able
Avail-
able
New setting
valid after
power cycle.
Interface Specifies the interface to use
when an optional or third party
interface board is installed in
the TPS (Third Party Slot).
Auto /
SCSI /
TPS
Auto Not
Avail-
able
Avail-
able