Filter
Top Products
7-60
7.3 Setup Mode Details
27. Setting Power save mode
1) Press (Next button) or (Previous button) and let LCD display
<Screen27>.
<Screen27>
2) At <Screen27>, press (Left arrow button) or (Right arrow button)and
select [On] to use power save mode.
Next, press (Enter button). Then the LCD display shows <Screen27-1>.
If power save mode is not required, press (Right arrow button) and select
[Off].Then, press (Enter button).
<Screen27-1>
3) At <Screen27-1> ,by pressing (Left arrow button) or (Right arrow
button), select the scanner wait idle time before entering power save mode.
A minimum of 5 minutes to the maximum of 60 minutes can be selected with 5
minutes increment.
4) Press (Enter button) and enable to use power save mode. Finally,
press (Exit button) and the LCD display goes back to [Ready] screen.
HINT
The blinking item is the one selected.
HINT
The default time recommended by the ENERGY STAR
®
program is 15 min-
utes.
27
S
o
!
a
P
rw
e
=
ve
27
e
!
25
1
mT
i
=1
1
0
0
mi
n
-