Fujitsu FI-486PRFR Photo Scanner User Manual


 
8
1.3 Basic Operations of the Operator Panel
Clearing the consumables replacement message
This scanner has the consumables counters to estimate life of the consumables. When one
of the consumables counters, a counter for the Pad ASSY, the Pick roller unit, the Brake
roller unit, the Front-side lamp or the Back-side lamp reaches the pre-set value, the LCD
shows a message that the consumable may be expired. Here is an example of error mes-
sages.
Enter setup mode. (For the details on how to enter the setup mode, refer to "Chapter 7
OPERATOR PANEL MENUS"
Keep pressing (Next button) until the LCD shows the following message.
From this screen, you can select the consumable counter to reset. For the details on how to
clear consumable counter, please refer to the section “7.3 Setup Mode Details,” “9. Abrasion
counter reset.”
btaA
r
o
ana
rm
l
i
SE
! 04 Abr asi o
C
NT
XXXX XX NO
n
ER/=T