Filter
Top Products
11
Please follow the steps below to run the Install Wizard, which will guide you through the Administrator utility and
Camera Viewer installation processes. The following installation procedure described here is for Windows XP. The
installation procedures for Windows 98SE/Me/2000/Server 2003 are similar.
1. Insert the CD that was included in the network camera’s package into your CD-ROM drive. The “Autorun.exe”
program should execute automatically and the following window will appear. If the program does not execute
automatically, you can run the “Autorun.exe” program manually from the “Autorun” folder on the CD.
2. The window will display eight items on the right hand side. Please select the program you would like to install or
click “Exit” to install the program later. The following steps describe the installation process for the Admin Utility.
Click on “Install Admin Utility”. After you have installed the Admin Utility, you can install the Viewer utility in the
same manner by clicking on “Install Viewer”.