Filter
Top Products
30
6.25 Login Free
The Login Free feature allows the user to isolate the video frame on its own page. Please note that this page will only
show a still image of the video frame. The user can click on the web browser’s “Refresh” button to update the image.
This can be useful when trying to access quick snapshots from the HNC290G from a cell phone, or when establishing a
free Hosted Video Management account (included with the purchase of this camera). In order to utilize this feature, you
will have to:
1. Type in the desired extension in the “Login Free Filename” field in the “Network Settings” section of the
camera’s web UI, or in the “Login Free” section of the Administrator Utility, as shown in the figure below. If you
do not wish to change the extension, the default extension is “loginfree.jpg”.
2. Type in the camera’s IP address in the “Address” bar of your web browser, followed by a forward slash and the
extension. In the example shown below, the camera’s local IP address is 10.1.1.198. Therefore, to access the
Login Free page, the user would enter the following into the address field: 10.1.1.198/loginfree.jpg. If you have
changed the camera’s web port, as has been done in the example below (web port: 85), the user would enter the
following into the address field: http://10.1.1.198:85/loginfree.jpg
.