Filter
Top Products
63
Channel This setting is only available for Ad Hoc mode. Select the number of
the radio channel used for the networking. The channel setting should
be the same as the network you are connecting to.
Site Survey Click the “Site Survey” button to search all the available wireless LAN
networks in the vicinity of the network camera.
Encryption Settings
Encryption Mode Disable: Disables the encryption function for the wireless data
communications.
WEP64: Enables the 64-bit data encryption function. If you select this
option, a set of WEP64 key fields will appear below the “Encryption
Mode” setting.
WEP128: Enable the 128-bit data encryption function. If you select
this option, a set of WEP128 key fields will appear below the
“Encryption Mode” setting.
WPA: If your wireless network uses WPA encryption, a “WPA Pre-
Shared Key” field will appear below the “Encryption Mode” setting.
You can type in your pre-shared key in this field.
Key Type (for WEP64
or WEP128)
HEX: Only the characters “A-F“, “a-f“ and “0-9“ are permitted for
HEX format.
ASCII: Numerical values, characters or signs are permitted for ASCII
format. This format is generally easier for most users.
Default Key Select one of the keys (1 - 4) as the encryption key.
Encryption Setting
Key1 - Key4 (for WEP64
or WEP 128)
The WEP keys are used to encrypt data transmitted over the wireless
network.
Fill in the fields by following the rules below:
64-bit: Input a 10-character Hex key (in the “A-F”, “a-f” and “0-9”
range) or a 5-character ASCII key (including “a-z” and “0-9”) as the
encryption key. For example: “0123456aef“ or “test1”.
128-bit: Input a 26-character Hex key (in the “A-F”, “a-f” and “0-9”
range) or a 13-character ASCII key (including “a-z” and “0-9”) as the
encryption key. For example: “01234567890123456789abcdef“ or
“administrator”.
Apply When you finish in the “Encryption Setting” section, click this button
to validate the setting values.