Filter
Top Products
13
You can use either of the two following methods to charge the camera’s battery.
• USB adapter
• USB connection to a computer
• To charge with the USB adapter
1. Turn off the camera.
Check to make sure that the camera’s monitor screen is
blank. If it isn’t, press [ON/OFF] (Power) to turn off the
camera.
2. Connect the camera with the USB cable as shown.
3. Connect the other end with the USB adapter
and plug it into a power outlet or with the USB
port of PC directly for charging.
LED Lamp Operation
4. After charging is complete, disconnect the USB cable from the camera
and then unplug the power cord from the power outlet.
Charge the Battery
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
USB adaptor problem, or battery
problem (page 96)
Off Charging complete
[ON/OFF] (Power)
LED Lamp