HP (Hewlett-Packard) P650 Digital Camera User Manual


 
96
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
If the camera’s back lamp starts flashing red...
Ambient temperature or the temperature of the battery may be either too high or
too low. Disconnect the USB cable and wait until temperature is within the
allowable charging range before trying again.
Battery contacts may be dirty. Wipe them with a dry cloth.
Try connecting to a different computer USB port. Depending on the setup of your
computer, you may not be able to charge the camera’s battery over a USB
connection.
1. Open the battery cover and remove
the current battery.
With the monitor screen side of the
camera facing upwards, slide the stopper
in the direction indicated by the arrow in
the illustration. After the battery pops out,
pull it the rest of the way out of the
camera.
2. Load a new battery.
Power Supply
Charging
To replace the battery
S
topper