63
• PLAY Menu Operations in This Manual
PLAY menu operations are represented in this manual as shown below. The following
operation is the same one described under “Example PLAY Panel Operation” on
page 62.
Menu
Displays the PLAY menu. You can perform the following
operations on the PLAY menu.
1
Use [ ] and [ ] to select the tab
where the menu item you want to
configure is located.
2
Use [ ] and [ ] to select the
menu item you want, and then
press [ ].
3
Use [ ] and [ ] to change the
setting of the selected menu
item.
4
Press [SET] to apply the setting.
NOTE
• Pressing [ ] (Delete) performs one of the following
operations.
– If you previously selected a tab, pressing [ ] (Delete)
returns to the viewfinder screen.
– If you previously selected menu item, pressing [ ]
(Delete) returns to the tab.
Selected menu item
Tabs
Procedure
[] (PLAY)
[SET]
MENU
PLAY Tab
Protect
Use [ ] and [ ] to select the bottom PLAY Panel
item (MENU) and then press [SET].
Use [ ] and [ ] to select the
“PLAY” tab.
Press
[] (PLAY).
Press [SET].
Use [ ] and [ ] to select “Protect”
and then press [ ].