Filter
Top Products
35
1. In the REC mode, press [ ] ( ) once.
2. Use [ ] and [ ] to select the flash
setting you want and then press [SET].
• If there are no indicators on the monitor
screen, you can cycle through the flash
modes by pressing [ ] ( ). You can turn
display information on or off by pressing
[ ] (DISP) (page 9).
3. Press the shutter button to shoot.
Using Flash (Flash)
Auto Flash
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Forced Off Flash does not fire.
Forced On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Flash
[] ()
LED Lamp
Flashes orange while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
snapshot until the lamp stops flashing
orange, which indicates that charging is
complete.
indicates the flash will fire.