Filter
Top Products
15
2. With your computer
turned on, connect the
camera to it.
The LED Lamp should light
red, indicating that charging
has started.
The LED Lamp will go out
when charging is complete.
It takes about 130 minutes to
achieve a full charge.
Charging may take longer
depending on charging
conditions.
LED Lamp Operation
3. After charging is complete, disconnect the USB cable from the camera
and then from the computer.
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long,
or battery problem (page 96)
Off Charging complete
USB port
USB cable
(included with camera)
[USB]
port
Large connector
Small
connector
Making sure that the mark on the USB cable
connector is towards the lens side, connect the
cable to the camera.
LED Lamp