Filter
Top Products
English
156
Cautions When Using DVD Video Camera/
Recorder by Connecting It to PC
Note:
• Do not use Windows
®
application to finalize a DVD-R
disc recorded on this DVD video camera/recorder: The
disc will not be recognizable on the DVD video camera/
recorder.
• When formatting a DVD-RAM disc on Windows
®
, use
the UDF2.01 format (2.0 if 2.01 cannot be selected) (see
“Terminology” on page 160). Formatting with other
standards could cause the DVD video camera/recorder
to malfunction.
• Before processing or editing photos, be sure to copy the
JPEG files in 100HPNX1 folder to the hard disk of PC.
• Ordinary data on PC can usually be written to DVD-RAM
disc in this DVD video camera/recorder, but Hitachi does
not guaranteed the operation.
• If the PC is started from suspend (see “Terminology” on
page 160) (or sleep or standby) with this DVD video
camera/recorder connected to the PC, the DVD video
camera/recorder may not be recognized: Disconnect
the DVD video camera/recorder from PC once, and
restart the PC.
• Multiple DVD video camera/recorders cannot be
simultaneously connected to PC.
• Use a reference of approx. 30 minutes at approx. 86°F
(30°C) or less for operation when connecting this DVD
video camera/recorder to PC.
- Use a reference of a continuous 30 minutes or less for
write operation when using the DVD-MovieAlbum
copy tool provided with DVD-MovieAlbumSE.
- If the temperature of this DVD video camera/recorder
is too high, writing or reading on this DVD video
camera/recorder may be faulty. And in particular, note
that, if an error occurs during writing to DVD-R disc, the
disc will not be usable. Take care that the temperature
of this DVD video camera/recorder is not too high.