Hitachi DZMV550A Camcorder User Manual


 
English
177
Video written to hard disk
of PC cannot be edited
on DVD-MovieAlbum
copy tool.
DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk
of PC: Copy the data to another DVD-RAM disc and then edit it.
Movies are not
recognized by
application in PC.
Make sure the power switch of this DVD video camera/recorder is set
to “O VIDEO”, “N PHOTO” or “P PHOTO”.
The DISC EJECT button
is not valid when the DVD
video camera/recorder is
connected to PC.
While the DVD video camera/recorder is connected to PC, use
Explorer to right-click the DVD video camera/recorder drive icon and
execute “Eject”.
If DVD-MovieAlbumSE is running, clicking the eject button on DVD-
MovieAlbumSE will open the cover of disc insertion block of this DVD
video camera/recorder: Remove the disc.
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
The file system of this DVD video camera/recorder is operated on
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows
®
as of January, 2004, the time stamp of file
viewed on Explorer looks different from the actual recording time.
The actual recording time will appear for date/time indication on
playback screen.
When DVD-
MovieAlbumSE is
started, “Disc in Drive X:
cannot be used”
appears.
A disc other than DVD-RAM is loaded in drive: DVD-MovieAlbumSE
cannot be used for media other than DVD-RAM.
Click the “Preference” button in the dialog box, click the “Device
Setting” tab to choose the drive where DVD-RAM disc is loaded in
the “Drive Select” column, and then click “OK”.
An image that should
have been recorded
does not appear when
DVD-MovieAlbumSE is
started.
Click the “Preference” button at top right of DVD-MovieAlbumSE
screen, click the “Device Setting” tab to choose the drive where
DVD-RAM disc is loaded in the “Drive Select” column, and then click
“OK”.
“DISC ERROR” appears
when releasing write-
protect.
A disc that was write-protected using the write-protect setting tool
(WPTOOL) equipped with the UDF driver on the CD-ROM provided
with this DVD video camera/recorder cannot be released on this
DVD video camera/recorder as is. Use the write-protect setting tool
on PC to release the write-protect.
“USBNTMAP.SYS not
found” appears while
installing USB driver.
You have designated a folder which is different from that for
Windows
®
when installing USB driver: Designate the correct folder.
No USB HS (high speed)
connection even when
USB2.0 card is used.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker in
order to operate the USB2.0 card at HS (high speed).
152
The “capture” function of
MyDVD is unavailable.
The “capture” function of MyDVD is only for DVD camera with i.Link
connection: It is not available on this DVD video camera/recorder.
Use DVD-MovieAlbumSE to import the images recorded on DVD-
RAM disc into the PC.
Symptom Cause and Correction
Reference
page