Hitachi DZMV550A Camcorder User Manual


 
English
84
Note:
If you operate the DVD video camera/recorder
connected to another device, always power the camera/
recorder from AC outlet using the AC adapter/charger.
If you use a Hitachi VCR, it will be operated by the remote
control provided with the DVD video camera/recorder.
When recording an image from a Hitachi VCR, change
the remote control code of the VCR to other than
“VCR2”.
With DZ-MV580A, using S-VIDEO will enable you to
record clearer images.
The DZ-MV550A cannot record S-VIDEO input.
Reduce the volume of external input sound heard from
the built-in speaker: The loud volume may cause noise
to enter the recorded image.
The recorded contents can be played back in the same
manner as when playing back camera images recorded
on this DVD video camera/recorder.
Still images can also be recorded on DVD-RAM disc or
card. See “Switching External Input Recording Method
(PHOTO Input)” on page 98 for details, and “Recording
Stills” on page 50 for how to record still images.
The “Input Source” setting will return to “CAMERA”
whenever DVD video camera/recorder is turned off.
Recording of most images is prohibited by the copy-
guard signal to protect the copyright, except for images
recorded on camcorders for personal enjoyment.
“COPY PROTECTED” appears in these images: They
cannot be recorded on this DVD video camera/recorder.
Typical copyright protected images include those of
DVD video, LD, recorded video tapes, some parts of
digital satellite broadcasts, etc.
If a video signal that cannot be read by this DVD video
camera/recorder is present - even in images recorded
on camcorder for personal enjoyment without copy-
guard signal - the input image may not be recorded
normally.
If the input signal is interrupted by switching the channel
on TV or switching the signal using video selector (see
“Terminology”, P. 160), normal recording cannot be
performed.