Filter
Top Products
English
40
●Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/charger:
Note:
See “Troubleshooting” on page 172 when the CHARGE indicator blinks.
●Reference for time required to charge battery (at approx. 25°C):
Approx. 165 minutes
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1 Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it upward until a click is heard.
Note:
• Make sure that the battery is in the correct orientation.
• Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1 Slide the BATTERY EJECT switch on the bottom
of DVD video camera/recorder, and hold it.
2 Slide the battery downward to remove it.
Note:
• For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
• Be careful not to drop the removed battery.
• If the battery remains attached, minute level current will
flow even if the DVD video camera/recorder is off, and
the battery will discharge.
Charge status CHARGE indicator
During charge Lit
Charge complete Goes out
Terminal
must
face up.