Filter
Top Products
Network Video Server User’s Guide
16
Installation Using Windows IP Installer
To install an IP address, you should use the IP Installer provided with NETWORK VIDEO SERVER.
Note: The MAC Address can be found on the underside label of the NETWORK VIDEO
SERVER. The MAC Address always starts with MNS.
1) After you start IP INSTALLER it scans your network
for available NETWORK VIDEO SERVERS and
NETWORK IP CAMERAS. IP INSTALLER
displays all devices found in the list box.
2) In order to change one particular NETWORK
VIDEO SERVER (or NETWORK IP CAMERA),
simply highlight the entry in the list box. As you do
that the fields below will be populated with the
devices current settings.
3) Enter a new IP Address, Gateway Address, Subnet
Mask, (optional) DNS Server Address along with the
Admin’s ID (admin) and Admin’s Password (admin).
4) Enter a new IP Address, Gateway Address, Subnet
Mask, (optional) DNS Server Address along with the
Admin’s ID (admin) and Admin’s Password (admin).
5) Click on “Change Network Configurations”.
6) Wait for the Success Message.