Filter
Top Products
6.6 INVERTED INSTALLATION
The pan and tilt unit may be inverted or hung in certain applications. The teleconferencing lens
adapter bracket is required to provide the necessary clearance between the lens and the side of
the pan and tilt. If the unit is hung the pan left, pan right, tilt up, and tilt down functions will be
backwards for that particular camera station. This condition can be corrected by reversing the
manual controls to the pan and tilt for this particular camera. This operation is done at the
controller. For detailed instructions refer to the Pan/Tilt Controller Manual.
JVC 3-CCD
2/12/05 Document D0153
25